RSS Feed
Knowledgebase : Emergic Mail Server
A Spoof mail generates from outside your network with a spoofed email ID. Some bulk mailing virus generates this message and it gets trapped by the anti-virus on MailServ. Since the mail has been composed with the From ID as one of your company email I...
YOU CAN CONFIGURE THE BACKUP AS PER THE REQUIREMENT FOLLOWING IS THE PROCEDURE TO SET THE BACK CONFIGURATION : - STEUP1: Login to suadmin ---- > System ----- > Maintenance ----- > Backup ---- > Configure backup
This option allows you to manage which all email ids will be allowed to send mails to the group email id Following is the procedure to set the privilege id setting : - Step1 : Login on suadmin panel, click Email Restrictions -- > Privilege Restri...
Please check following is the procedure by which you can set email restrictions to a group email id : - =================================================================== Login to suadmin ---> Accounts ---> Advanced ----> Email restrictions ---> Se...
STEPS TO CHECK MAILQ STATUS USING MAILSERV ADMIN PANEL. STEP1. Login to suadmin click on Status tab and then select Mail queue
FOLLOWING IS THE PROCEDURE TO SET AUTO-DELETE MAIL OPTION : - STEP 1) Login to suadmin ----- > Accounts --- > Advanced ---- > Auto-delete userwise STEP2 ) You can set number of days according to your requirement for different folders for a particula...
Following is the procedure to set auto-delete mail option : - =================================================================== Login to suadmin ----- > Accounts --- > Advanced ---- > Auto-delete userwise =============================================...
If you want Subject in Maillog as well as Maillog Database please do the following steps: 1. put an entry into /etc/postfix/header_checks /^Subject:/ WARN 2. /ETC/INIT.D/POSTFIX RESTART 3. untar the attached file in '/' TAKE BACKUP OF FILES BEFORE UNT...
HOW TO VIEW THE LICENSE FILE IN MAIL SERVER ? * Login to the suadmin * Click on System --> License --> View License
STEPS TO UPLOAD THE LICENSE PROVIDED BY NETCORE ON THE EMERGIC MAIL SERVER : STEP1) Login to suadmin administration Interface, Unzip the EMS License sent to you by the Netcore Sales Team. Click on Systems ---> License ---> Upload option to upload th...
STEPS TO ADD A USER AND ENABLE PROXY. * Add the users through Accounts-> users-> Quick add menu Note : proxy flag should be "yes" * Add the group like accounts, management, edp through the front end. Accounts -> Groups -> Add userwise and ...
STEPS TO CONFIGURE BACKUP OF EMS ON A REMOTE MICROSOFT WINDOWS MACHINE, STEP1) Login to the Netocore EMS Server Suadmin Front End. STEP2) Choose System --> Maintenance :- Backup :- Remote Backup STEP3) Now choose the Remote Machine Setup and c...
Delay/Bounced Mail from external domains can occur due to the following reasons, 1) An issue on the sender domain. Cross check if there is an issue on the sender dmain, send a test mail from an external domain like gmail.com to the said domain and chec...
THE STEPS TO SCHEDULE A BACKUP ON THE NETCORE EMERGIC MAIL SERVER VERSION 6.05 IS AS FOLLOWS, STEP1) Login to the EMS 6.05 Suadmin Administration interface. STEP2) Go to Scheduler-->Backup. STEP3) Choose the Checkboxes for the various times of the...
STEPS TO ASSIGN A GATEWAY I.P ADDRESS ON A NETCORE EMERGIC MAIL SERVER. STEP1) Login to the Netcore suadmin Interface. STEP2) Choose the Network --> Internet --> Lease,Cable option. STEP3) Enter the gateway I.P. Address on the screen and click o...
TO ADD A NEWADMINISTRATOR TO THE NETCORE EMERGIC MAIL SERVER, FOLLOW THE STEPS MENTIONED BELOW. STEP1) Login to the Netcore Emergic Mail Server suadmin Interface. STEP2) Choose the 'System' ---> 'Administrator' ---> 'Add Admins'. STEP3) Choose the...
Procedure For Manual Dialing. Before starting the below commands please do a /ETC/RC.D/INIT.D/DIALD STOP at the prompt. * Login as ROOT, then at the root prompt type the following command….. WVDIALCONF /ETC/WVDIAL.CONF * Then go to ...
To perform a basic trouble shooting of Internet Connectivity on the Netcore EMS Server, please follow the steps provided below: 1) Press Cntrl+Alt+F1, login as the root user and ping localhost and check if you are receiving a proper response. 2) If yo...
FOLLOW ARE STEPS MENTIONED TO DELETE MAIL-ID FROM THE NETCORE UUCP SERVER STEP1) First login to Netcore UUCP MAIL ADMIN Interface using URL http://netcore.co.in/netcorelogin.html with the login credentials provided: STEP2) Select the box on the lef...
STEPS TO CREATE WATCHDOG ON EMS SERVER STEP1) First create a one group EMS server and then put members in that newly created group. Go to suadmin front end. Accounts -> Advanced-> Watchdog put the watchdog id. STEP3) Then restart MailScanner serv...
1) check that lancard is detected by linux or not ------------------------------------------------------------------------------------------------------------------------------------------------------- [root@netserv ~]# lspci 00:00.0 Host bridge: Intel Co...
1) First check that internet is accessible from Mailserver or not. [root@netserv ~]# route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 192.168.0.0 0.0.0.0 255.255.0.0 U 0 ...
Following are the steps that needs to be followed : STEP1) Log on to http://pop2.netcore.co.in and disable the pop account. i.e. mahadeo@test.com STEP2) Delete account from pop server. STEP3) Click on "Synchronize [1]" link which is at bottom of t...
STEPS TO RECEIVE COPY MAILS ON LOCAL MAIL SERVER FROM POP ACCOUNT. Lets assume that currently POP account is already existing and active. If it is not then create it. I am assuming test as POP account. STEP1) Create user on local server, also add s...
There seems to be recipient's email box is full, please contact them to let them know about it.
We cannot retrieve mails from RBL , because Mails blocked in RBL get bounced back to sender.
Many SMTP mail servers accept mail for email domains other than their own, and forward it on to the intended recipient. Third-party relay, also known as "open relay" or "insecure relay" is where a mail server will route mail for anybody in the world. Any...
RBL stands for Realtime Blackhole List. RBL database available in the internet, contains addresses of servers known to send spam and also servers that are known to distribute malicious spam. Most Spam is usually sent by third parties from servers from ...
STEPS TO CHECK MAILBOX USAGE Steps Click on Status ---> Disk Usage
To access the Netcore EMS Server Web mail interface for the administrator (suadmin) a) Type https:///suadmin This will open the suadmin administration interface on which you can provide your suadmin user name and password to access the suadmin adm...
STEPS TO CREATE A GROUP ON MAILSERV STEPS 1) Login to MailServ admin panel, click on Accounts --> Groups --> Add UserWise" STEP 2) Group ID: Enter the Group ID which will act as an email alias. Group Description: Enter some short descriptive text...
For "Quick Add" do the following steps: STEPS 1. Go to Accounts --- > Users --- > Quick Add STEP 2 : Kindly fill in the details, for user you need to add, allow proxy is optional . For "Detailed Add" do the following steps: STEP 1. Go to "...
STEPS TO CREATE USER ON NETCORE SERVER. STEP1. On http://netcore.co.in/netcorelogin.html, under click on Add Email Account Step2. When you click on "Add Email Account" it will prompt you for a popup window as shown in the below screen, enter your...
TO ADD A DISCLAIMER AT THE END OF MY EMAIL VIA THE NETCORE EMS FOLLOW, THE STEPS MENTIONED BELOW. STEP 1) Login to the Netcore EMS Suadmin Interface. STEP2) Choose the Network ---> Email Setup ---> Disclaimer option. STEP3) Choose the 'Enable Di...
The Netcore EMS Server is designed such that it expects at least one functional Ethernet card on the system which should be assigned an I.P Address. If either the onboard of external ethernet card is not RHEL 5/6 compatiable the Netcore EMS server will...
STEPS TO SET THE VACATION RESPONSE AND FORWARDING : - A) Vacation Response : - STEP 1) Login to webmail with the specified username and password. STEP2 ) Click on the Filters Option STEP 3) Click on Enable and Edit the message that you want to set a...
STEPS TO CONFIGURE SYSTEM ON MAILSERV PANEL : STEPS 1 : Login to suadmin, click on system tab, select configure system. Step 2 : Configure your domain name, incoming and outgoing mail configuration if its a UUCP setup.
STEPS TO CONFIGURE SYSTEM ON MAILSERV STEP1. Login on MailServ admin panel and click on System tab --> configure System. STEP 2. Mention Domain Name for Domain configuration, if you opt for uucp setup, configure the setting as mentioned.
STEPS TO CHANGE ADMINISTRATOR EMAIL ADDRESS. Step1. Login to suadmin panel and click on system -- > change email. Step 2. Mention email-id for admin, to which you want to get notification.
STEPS TO ASSIGN IP ADDRESS TO RESTRICT ACCESS OF MAILSERV ADMIN PANEL. Step1 : Login on admin panel and click on system -- > allow IP
STEPS TO UPLOAD LOGO ON MAILSERV PANEL. Step1. Login to MailServ admin panel, goto System -- > Administrator -- > Upload logo. Step2. Click on browse option to upload from local system, or you can provide url link for it and click on upload.
STEPS TO SET MESSAGE ON WEBMAIL LOGIN SCREEN. Step1. login on MailServ panel and click on system -- > Administrator -- > Upload Mesage. Step2. Put desire message you want to set for webmail login screen, click on upload.
STEPS TO PROVIDE SERVER CONNECTION ON SSH PORT FROM MAILSERV PANEL. STEP1. Login on MailServ panel, click on System tab -- > Remote Admin -- > Netcore Support. Step2.To give access to technical person from netcore, kindly provide ssh port no gene...
STEPS TO ENABLE BLOCK ATTACHMENT FEATURE ON MAILSERV. Step1 : Login on MailServ Admin panel, with credentials provided. Step2 : Click on Network tab -- > click on email setup -- > Attachment block. Step3 : Under block attachments: check mark e...
STEPS TO ENABLE MAIL BODY BLOCK RULE ON MAILSERV. Step1. Login to MailServ admin panel with credentials of suadmin. Steps2. Select Network tab -- > Email Setup -- > Body block. Steps3 : Select radio button next to Enable body block rules. You ...
Steps to manage secondary domain on MailServ admin panel. Step1: Login on MailServ Admin panel, using credentials provided. Step2 : Select network tab --> email setup --> Manage Secondary domains Step3 : Add a secondary domain name and Locatio...
E-interact E-interact installation guide and user Manual for detail reference is attached to this article.
SET UP AN LDAP ACCOUNT ON ANDROID FOR GAL This page explains how to set up an LDAP account to be able to look up shared addresses from netCORE server using Contacts In Line Android application. Contacts In Line allows to lookup into online directori...